Just discovered this. While shooting on the Phantom Flex at high speeds, dolly movements become a problem. No more.
The
Cheetah Dolly motion control base is a track system that can either be programmed to do a tracking move, or operated live with an encoder control, and then played back through Kuper motion control software. In addition it can also be used in the “non motion control mode†with our motor speed controller to accomplish a consistent precision tracking speed. You can use it as a tracking system only, or mount a pan/tilt or pan/tilt/roll head to it. Camera lens height can be set at a fixed position ranging from 6in to 8ft. by using anything from a low hat to tall camera sticks. In addition an offset arm can be added for repositioning of the camera head. It can either ride on our Sorensen Design track, which is extremely stable and still light enough to take anywhere, or different diameters of curved track. Track speed can range from time-lapse mode to 18 feet per second, with track runs ranging from 4 feet to 150 feet. The Cheetah Dolly can be utilized to move a wide range of objects other than a camera such as: lights, props or people.
Physical Specs:
Width: 30 in. to 6 ft.
Length: 30 in. to 8 ft.
Base Height: 14 in.
Tech Specs:
Track Width = 32″
Track Drive = Gear Drive (Rack and Pinion – Servo Motor)
Top Speed = 18 Feet Per Second
Motion Control Axes = Up to 7 Standard (Track, Pan, Tilt, Roll, Focus, Iris, Zoom) – Custom Configurations available